User's Manual

BlueHDP+USB
User Guide
Release r01 www.stollmann.de Page 6 of 14
2 Installation
2.1 Procedure of Installation
Connect the BlueHDP+USB to a PC USB port and install the Silabs USB to UART
Bridge driver (can be downloaded at
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx).
Find a new COM port in the device manager called “Silicon Labs CP210x USB to
UART Bridge”.
Now the BlueHDP+USB is ready to operate at the assigned COM port.