User Manual

1) After a measurement, the data is transmitted to the gateway by Bluetooth .

And the data is automatically transmitted to the server via mobile networks.

2) Time set-up

① Gateway time set-up

a. A gateway time set-up is done at the beginning of the server access.

b. A gateway time set-up is done before disconnecting the server access.

② Device time set-up

a. A&D weight scale, A&D thermometer, J&J Glucometer

- Automatic time set-up is taken after sending data by Bluetooth.

b. IEM B/P monitor: Time set-up should be done in the device manually.

3) Reading LED

① Starting Bluetooth communication: Reading GREEN led on

② End Bluetooth communication: Reading GREEN led off

③ At the success of Bluetooth communication: Reading LED blinks GREEN two times.

④ At the failure of Bluetooth communication: Reading LED blinks RED five times.

4) Data transmission to the server

① Sending LED

a. Starting server communication : Sending LED in GREEN is on.

b. End server communication: Sending LED in GREEN is off.

c. At the success of server communication: Sending LED blinks GREEN two times.

d. At the failure of server communication: Sending LED blinks RED five times.

② Notification: Server access is taken at power on and power off.

③ Heart beat: Server access is taken every six hours, after power-on.

④ At data receiving from device, automatic server access is taken and data is

transmitted.

⑤ At the failure of server access, reconnection to the server is done periodically.

Period is every hour. (Max. 3 times)

5. XLM File

<?xml version="1.0" encoding="utf-8" ?>

</Device>

<Data id=

"ZHZ306CBY" measuretime="20100101001406" result="112" unit="0" model="1" adapter="1" />

</Device>