GPRS Gateway Instruction H3 System Co., Ltd Print: 4th of Oct. 2010 Version: R0.
No. 1 2 Date Version 1st OCT.2010 R0.8 4th OCT.2010 R0.9 Content Author Manho Kim, Jongbo Lee -Additional Content1. D/C SW Installation 2.
1. Gateway Installation 1) Unscrew and open the bottom cover. And insert a simcard. 2) To configure, connect a serial cable between a gateway and a PC and run the configuration software. And power on the gateway. ① Start command is transmitted from a gateway to configuration software. If there is any expected response from PC, communication for set-up mode is on. Otherwise, regular log is transmitted from the gateway to the configuration software. a.
3. D/C Software Installation 1) Copy ‘DataCollection(GPRS)’ in the PC and run ‘GPRS_Server.exe’ file. 1) Description ① Port : Set the receiving socket port of DataCollection Server. ② Start: Start server ③ Stop: End server ④ Clear: Clear the log screen 2) Xml, log File ① Data and log folders are in DataCollection folder. ② Data : In data folder, xml file is created as folder by date, and in the xml file folder , the data is created by time.
1) After a measurement, the data is transmitted to the gateway by Bluetooth . And the data is automatically transmitted to the server via mobile networks. 2) Time set-up ① Gateway time set-up a. A gateway time set-up is done at the beginning of the server access. b. A gateway time set-up is done before disconnecting the server access. ② Device time set-up a. A&D weight scale, A&D thermometer, J&J Glucometer - Automatic time set-up is taken after sending data by Bluetooth. b.
PAGE 7Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
