User's Manual

8
 If the data transmission succeeds, the Green LED blinks three(3) times and if fails,
the Red LED blinks five(5) times.
 It may take more than 10 seconds for the first trial after replacing the batteries.
 For OneTouch Ultra, the Red LED keeps blinking until the glucometer shuts off
after data transfer.
 Notes
 Only normal readings will be transmitted. Control solution readings and
erroneous readings will not be transmitted.
 “HI” and “LO” readings will be transmitted.
 If there is no normal readings unsent, then the adapter does not try to
connect to the target device.
 If data download from the glucometer succeeds but Bluetooth
communication fails, then the downloaded readings are stored in the
adapter and the readings will be transferred to the target device at the next
successful Bluetooth communication.
 For some OneTouch Ultra2 and OneTouch Mini/Easy glucometers, the
automatic data transfer described above is not supported. For those meters,
please use manual data transfer or automatic wake-up mode described later.