User's Manual

Supported firmware

version

All Version 1.2 or later versions

Action Press the Hidden button

Press and hold the Red button on

the top cover until the LED turns

RED (for more than 5 seconds)

BT device name AMC_JandJ

H3GMA_(Model)_(FW

version)_(BT address)

Pin CODE 1234 9314

* Notes

Model: JandJ

FW version: X.X (e.g. 2.0)

BT address: The last 3 hexas, that is, 6 digits. For example, A1B2C3.

Table 2-1

 The detailed steps are as follows:

① Let the device be pairing mode. For example, press and hold the Red button for

more than 5 seconds.

② When the LED turns RED, the Bluetooth adapter is at pairing standby mode.

③ Perform “Device search” with the target device and find a device named as

 AMC_JandJ or H3GMA_(Model)_(FW version)_(BT address)

④ Pair the target device with the Bluetooth adapter.

⑤ If the pairing succeeds, the Green LED blinks three(3) times.

If fails, Red LED blinks five(5) times.