User's Manual

10
 Even in the case that there is no reading unsent in the glucometer; the adapter
connects to the target device via Bluetooth. But it disconnects soon.
 The others are the same as those for automatic data transfer.
 This feature can be used for troubleshooting.
5. [Automatic Wake-up Mode]
 In the state of connection with OneTouch Easy/Mini or OneTouch Ultra2, this
adapter reads data and transfers the unsent readings once every 3 hours.
6. [Changing the glucometer connected]
 If you want to change the glucometer with new one, disconnect the glucometer,
remove batteries, press the Red button several times, wait for a while, insert batteries
again, and connect the new glucometer. And try to take a reading and confirm data
transmission.
 After pairing or changing the glucometer, it is strongly recommended to do data
transmission once.
 When the glucometer is changed, the entire information stored in the adapter will be
initialized. For example, readings downloaded from a glucometer before will be
deleted.
7. [Low battery sign and battery replacement]
 If the LED keeps blinking Red just after taking a reading or pressing the Red button,
please replace the batteries with brand-new ones.
 Don’t be confused with the Red LED’s blinking for a while after Bluetooth
transmission that is only with OneTouch Ultra. That is the sign waiting for Ultra’s
shutting off.