User's Manual

8
3. [Data transfer]
 Press the Red button of the Bluetooth adapter while a glucometer and the adapter
are being connected.(Accu-Chek Aviva)
 The adapter wakes up and starts downloading data from the glucometer. At the
wake-up, you can see Green LED’s short flashing and “PC” on the glucometer
display.
 If the data transmission succeeds, the Green LED blinks three(3) times and if fails,
the Red LED blinks five(5) times.
 The measured data is transmitted to the paired target device such as a mobile phone,
a gateway, etc.
 Even in the case that there is no reading unsent in the glucometer; the adapter
connects to the target device via Bluetooth. But it disconnects soon.
 Notes
 Only normal readings will be transmitted. Control solution readings and
erroneous readings will not be transmitted.
 “HI” and “LO” readings will be transmitted.
 If data download from the glucometer succeeds but Bluetooth
communication fails, then the downloaded readings are stored in the
adapter and the readings will be transferred to the target device at the next
successful Bluetooth communication.
 혈당계가 wakeup or sleep 상태에서도 Red button 으로 측정데이터
다운로드가 가능 합니다.
 Automatic time synchronization is not supported.