User's Manual

10
5. [Low battery sign and battery replacement]
 If the LED keeps blinking Red just after taking a reading or pressing the Red button,
please replace the batteries with brand-new ones.
Cautions
 Be sure to carefully read the user’s manual before use.
 Keep the Bluetooth adapter in a clean and dry place away from dust or corrosive gases
as well as away from fires
 Do not apply any shock or vibration to the product
 Do not rub the product with inflammable such as alcohol, benzene, or acetone the can
cause chemical change. Use a dry cloth to prevent the surface from being damaged.
 Do not stretch nor bend the cable by force.
 Disassembling the product is not advisable.
 Keep a Bluetooth adapter connected to a glucometer. Frequent connection and
disconnection may cause damages on the connector port.
 If Bluetooth communication failure continues for a long time, the oldest readings may
not be transferred to the target device. The maximum storage of the adapter is 500
readings.
Troubleshooting
 If you have some troubles in data transmission, please check the below
 Try to do “Data transfer” by pressing the Red button while a glucometer and the
adapter are being connected.
 Replace batteries with new ones.
 Disconnect the glucometer, remove batteries, press the Red button several times,
wait for a while, insert batteries again, and connect the glucometer again. And take
a reading and confirm data transmission.
 If the adapter does not work even after the above, please contact customer services.