Specification
Residential Electronic Water Conditioner
We have over 50 years combined experience treating hard water problems and over 100 years in manufacturing
Traditional Water SoftenerEWC - MAX i
One time, aordable initial cost High priced initial cost
Zero maintenance
Zero additional products required
Zero additional water usage
Zero negative environmental impact
Zero floor space wasted; wall mounted unit
Zero invasion into the water supply
Zero risk to health
Soft water continuously available
Soaps rinse clean, no residue
Continued maintenance required over lifespan
Requires heavy bags of salt to be repeatedly
purchased
Wastes water, raising both water and sewage costs
Discharges salt into public water or ground/well water
Requires large amount of floor space
Disturbance into the water system
Individuals with salt limitations on their diet
should use caution
Soft water not available during ‘regeneration’
cycles daily
10 year cost approximation with traditional water softener:
SALT: 50lbs/mo @ $10/bag = $1,200
MAINTENANCE: annual visit @ $300 = $3,000
WASTED WATER FOR REGEN: 100gal/mo @ $0.005 = $60
SEWER COST FROM BRINE CYCLE: 100 gal/mo @ $0.005/gal = $60
ADDITIONAL ELECTRICAL USE: Est $60/yr = $600
TOTAL 10 YEAR COST: $4,920 (approx.)
Soap and detergent do not thoroughly dissolve
FOR INDOOR USE
Calcium (Ca) Hardness
levels up to 35 grains per
gallon (gpg) or 598.5 parts
per million (ppm)
3 year warranty included
H2oEliteLabs.com
main water
s h u t o
valve
cold hot
gas
power