Full Product Manual
4
Installation Location
1. Determine where the main cold water line enters the house or condominium.
2. Apply inducon coil to main cold water line. If the main cold water line is not assessable then apply induc-
on coil to the incoming cold water line to water heater or tankless water heater. Only hot water appliances
will have treatment if the inducon coil is applied to the hot water. In most cases the hot water system is the
main culprit for limescale build up so this line will provide protecon and treatment. (Inducon coil can be
installed on a horizontal or vercal pipe)
3. If there is a water soener loop present the inducon coil can be applied at this locaon also. Addional
plumbing may be required. (This line may or may not treat kitchen faucets or outside spigots)
4. Customers using well water must apply inducon coil aer the pump and pressure tank if present. The
Elite Max i is an indoor only model. Provisions for outdoor locaons must be considered.
5. The Elite Max i can be used in conjuncon with other water treatment systems, lters or water soeners.
The inducon coil must be installed aer this equipment. If using in conjuncon with a water soener you
may keep the water soener online or turn if o by engaging the bypass mode. Under sink ltraon systems
will not eect performance of Elite Max i.
Well pumps Water soener Water soener loop House ltraon
Ideal locaon for
inducon coil