User's Guide

ManualsBrandsH2O ManualsSteam CleanersH20 HD 5-in-1 Steam Mop and Handheld Steam Cleaner

Key Features

Front view Back view

Foldable Handle

2. Cord Lock Slot

3. Foldable Handle Release Button

4. Upper Cord Wrap

5. Hand-Held Steamer Release Button

6. Hand-Held Unit

7. Steam Switch with Power Indicator Light

8. Steam Setting Button

9. Steam Power Level Indicator

10. Water Tank Release Button

11. Water Tank Light

12. Water Tank

13. Water Filter

14. Power Supply Cord

15. Lower Cord Wrap

16. Mop Head Screw

17. Mop Head

18. Microﬁber Cloth

19. Carpet Glider

Optional Accessory Usage

Part and Usage Assembly Tips/Caution

ACCESSORY BAG

Keeps all accessories and small

parts in one place. Easy to view

the contents and easily locate the

needed tool or accessory and ac-

cess it.

Handle with care as tools and ac-

cessories with sharp ends might

poke through the bag (Scraper,

Nozzle, etc.)

LONG STEAM LAZER

™

Easier to clean hard to reach areas

(behind the cabinets, behind the

toilet, far corners, etc.).

Attach the Long Steam Lazer

™

to the Extension Hose by aligning the

lock button on the Extension Hose with the designated hole on the Long

Steam Lazer

™

tool and push until it locks in place.

Attached to the Extension Hose, the Long Steam Lazer

™

can be used

by itself or with the Bendable Jet Nozzle and/or Round Brush (Nylon).

Remove the end cap before installing the Bendable Jet Nozzle or Round

Brush (Nylon).

SCRAPER – RIGID BLADE

1. Apply steam over the area that

you plan to scrape. Repeat a few

times if needed.

2. Detach the Window Cleaning

Tool with Scraper from the Exten-

sion Hose and start stripping off

the wallpaper or any hardened spills

(ketchup, syrup, etc.) from ceramic

or vinyl tiles, glass windows etc.

For removing wallpaper: Make “X”

shaped slits into the surface of the

wallpaper with utility knife to allow

steam to soften the adhesive.

Remove the Squeegee Blade and slide the Scraper into the Window

Cleaning Tool with the grooved side of the Scraper facing shorter plastic

teeth of the Window Cleaning Tool

Install the Coral Cloth or Garment Cloth to the Window Cleaning Tool

with the Scraper and attach it to the Extension Hose.

If using for wallpaper removal:

Cover your ﬂoor to protect from any

water dripping. Cover the outlets

with electrical tape to protect from

any liquids.

Selection of the steam setting

will depend on the surface being

treated. If you are concerned about

possible drywall damage from the

steam, start with Low Steam set-

ting.

BENDABLE JET NOZZLE

Cleans tight corners and hidden

places.

Screw the Bendable Jet Nozzle onto the Long Steam Lazer

™

. Remove

the black plastic cap from the top of the Long Steam Lazer

™

. Replace

the plastic cap after attaching the Bendable Jet Nozzle.

GARMENT STEAMING CLOTH

To steam a garment, place item of

clothing on a hanger and steam the

garment directly. Slowly slide the

Garment Steamer Head vertically

over the garment to smooth the

fabric and remove wrinkles and

odors.

Install the Garment Steaming Cloth / Lint Cloth / Microﬁber Scrubbing

Cloth over the Window Cleaning Tool.

Make sure to attach the cloth to all hooks on the Cleaning Tool Frame

to avoid slipping from the frame during use.

For garment steaming do not use

High Steam setting.

Some fabrics like leather, suede,

and velvet may not be suitable

for steaming. Please refer to the

manufacturer’s label.

Curtains and draperies can be

steamed while hanging.

Black Tag

Tag

side

back

Do not use High Steam setting.

Do not use on animals.

LINT CLOTH

Slowly pass over surface to be

cleaned. The absorbent Lint Cloth

picks up the dirt/hair loosened by

the steam.

MICROFIBER SCRUBBING CLOTH

Removes more dust and dirt with

less effort. Effective in cleaning

stubborn smudges or spills.