User manual

Tsm 125 25
5. LEDS AND BUTTONS
LEDs
1. LED “Heizen” is on: The function heating is active
2. LED “Kühlen” is on: The function cooling is active
3. LED “Relais” is on: The relay is switched on.
The signal “Heizen” for heating or “Kühlen” for cooling depends on the
temperature thresholds you have set and is done automatically.
Buttons
1. button
5
: increase your desired setting
2. button
6 : decrease your desired setting
3. button “SET”: change settings
6. MENU
When pressing the button “SET“ the device will enter edit mode showing the
following menu steps:
Menu Step N1
E 23
Identified by the symbol shown in first position, the “E”. Here you can select
the temperature at which an external device should be switched ON. The value
can be selected with the buttons
5
6
. The selection is confirmed by pressing
“SET” and the display will switch to the next step.
Menu Step N2
A 21
Identified by the “A”. Here you can select the temperature at which an ex-
ternal device should be switched OFF. The value can be selected with the
buttons
5
6
. The selection is confirmed by pressing “SET” and the display
will switch to the next step.