Information

15
Design and specifi cations are subject to change without notice. Ask factory for technical specifi cations before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Gold Capacitors Technical Guide
Product Type & Selection Method of Gold Capacitors
3-2-4 HW series
Basic Construction
The HW Series are constructed from activated carbon
particles, mixed with a binder then deposited on aluminum
foil strips. Lead wires are then connected. The foil strips are
wound together with a separator and inserted into aluminum
case. Electrolyte is then added, the case is sealed with a
rubber packing and fi nally sleeved (Fig.23).
Features
The HW series was developed for use in applications requiring
large amounts of current. Its internal resistance is less than
1/100 of general products. Applications of Gold capacitor
range from memory back-up to motor driving. For example,
the motor can work over 3 minutes with charging time of a few
seconds. It can be charged/discharged over 100 thousand
times, making the Gold Capacitor suitable for applications like
toys, LEDs, etc.
Applications
1. Solar battery circuits (Road guidance fl asher, LED light)
2. Toys (Motor-drive)