User manual

8
LCD Digital-Power-Panel-Meter.
This indication instrument is especially convincing because of its manifold applications.
The metered values for voltage, current and power are indicated in an illuminated way
and double-spaced in a LC-display at the same time.
The current measuring is carried out in a galvanic and separate way.
Currents in the range of -20 to 20 A can be measured. The panel meter is therefore fully
appropriate for the use of regulated power supply, charging devices and solar heating
systems.
Important! Read without fail!
If damage is caused due to non-observance of the instruction manual, the warranty
claim expires.
We don‘t assume liability for subsequent damage resulting from this.
1. Technical data
 •Supplyvoltage:  8..15VDC;
  oChargingrate: 40mAmax.;
 •Voltagemeteringrange: 0..40VDC;
  oInputimpedance: ca.90kOhm;
  oTolerance:  0,1%±10mV;
 •Currentmeteringrange: –20Abis+20A;
  oTolerance:  1%±50mA;
 •Powerdisplay:  0…800W;
  oResolution:  0,1W;
 •Backgroundlighting: blue
   •Measurements(LxHxT),mm:84x44x28;
Specified use
Thepanelmeterisallowedapre-circuitforadirect-currentvoltageof+40Vmax.,or
acurrentmeasuringfrom–20until+20A.Themeteredvaluesforvoltage,currentand
power are indicated in an illuminated way and double-spaced in a LC-display at the
same time. The current measuring is carried out in a galvanic and separate way.
Currents in the range of -20 to 20 A can be measured. The panel meter is therefore
entirely appropriate for the use of regulated power supply, charging devices and solar
heating systems.
•Thepanelmetermustnotbeoperatedwithoutbeingttedinacase,aconsolepanel,
a tableau or similar.
•Operationoutdoorsisnotallowed.
•Protectagainsthumidityandwetconditions
Adifferentusebeyondthis,willbeconsideredasunspecied.Theuser/operatorwill
be exclusively liable for the damage resulting from this.