User manual

| 23
Temperature Switch TS 1000
FUNCTION “HEIZEN” (HEATING)
This function is activated if the programmed switching ON temperature is the
smaller than the switching OFF temperature. The LED “Heizen” will indicate
the function. The relay is switched on if the measured temperature is smaller or
equal to T EIN (ON). The relay is switched off if the temperature is higher or
equal to T AUS (OFF).
For example: A switching ON temperature of 25°C is programmed and a
switching OFF temperature of 2. The device recognizes that this is a heating
mode and shows this by switching on the ”Heizen” LED.
FUNCTION “KÜHLEN” (COOLING)
This function is activated if the programmed switching ON temperature is the
higher than the switching OFF temperature. The LED “Kühlen” will indicate
the function. The relay is switched ON if the measured temperature is higher or
equal to T EIN. The relay is switched OFF if the temperature is lower or equal
to T AUS.
For example: a switching ON temperature of 25°C is programmed and a swit-
ching OFF temperature of 22°. The device recognizes that this is a cooling
mode and shows this by switching on the ”Kühlen” LED.
temperature
T OFF
T ON
HEATING
switch-ON-point switch-OFF-point
time
temperature
T ON
T OFF
COOLING
switch-ON-point switch-OFF-point
time
e.g. E 25 e.g. E 25
e.g. E 23 e.g. E 22