User manual

| 19
Temperature Switch TS 1000
Before opening the device, please disconnect it from the mains and/or make
sure that it is not connected to an electrical current.
Tools may only be used if the device is disconnected from the mains.
All connecting cables should regularly be inspected for any damages on the
insulation.
Should any damages be found, disconnect the device immediately from the
mains and repair or exchange it.
Should there be any open questions on the installation, the devices connected,
the functions, the maintenance, the safety or any other point concerning this
device, please contact a specialist or a qualified person.
Before installing and using this device, please make sure that it and the attached
devices are suitable and compatible. In no event will liabilities be taken for con-
sequential or incidental direct or indirect damages resulting from improper use
or incorrect installation of the device.
This item was tested and manufactured according to EU regulations 2014/35/EU
and 2004/108/EG and holds the corresponding CE approval. Any change
of the circuitry or exchange of components other than specified will in va li date
this approval.
MALFUNCTION
Only use the device if it is functioning without disturbance. If there is any mal-
function, switch off the device immediately and consult a specialist. The de vice
may only be reinstalled after it has been checked thoroughly. Signs of mal-
function are if:
– The device is visibly damaged.
– The device is malfunctioning.
– Attached cables or the housing has become loose.
Repairs may only be done by a qualified person or a specialist using original
components and parts. There is the danger of electrocution.