Operation Manual

Refill water during operation

1. No need to plug out when adding the water.

2. Turn the water injection hole cover anticlockwise.

3. Use the measuring cup to refill a suitable quantity of cold or hot water into the tank.

4. Re-install the water injection hole cover clockwise.

After the machine is used

1. After the cleaning machine is used, unplug the power cord and disconnect the power

supply.

2. Turn the water injection hole cover anticlockwise, and turn it down.

3. Empty the residual water in the tank and clean the external surface with a piece of dry

cloth.

4. At last, re-install the water injection hole cover on the the machine body and tighten it in

position.

ENVIRONMENT

CAUTION :

Do not dispose of this product as it has with other household products. There is a

separation of this waste product into communities, you will need to inform your local

authorities about the places where you can return this product. In fact, electrical and

electronic products contain hazardous substances that have harmful effects on the

environment or human health and should be recycled. The symbol here indicates that

electrical and electronic equipment should be chosen carefully, a wheeled waste container

is marked with a cross.

Manufactured and imported : Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE