PNF F-16 Fighting Falcon EDF 550mm Instruction Manual
HORIZONTAL STABILIZER
1. Get the Left/Right stabilizer parts ready. Apply foam safe glue to the root of the
stabilizer and install the left hand side stab onto the fuselage tail as shown.
2. Repeat the above steps for the right-hand side horizontal stabilizer.
3. View the model from the front, ensure the left and right horizontal stabilizer are
installed correctly like the picture shown below. Check this frequently as the glue dries.
VERTICAL FIN
Apply a thin layer of foam safe glue to the vertical fin and install it onto the
fuselage as shown.
5










