J3 Navy Cub Instruction Manual

ASSEMBLY OF MAIN WINGS, FRONT LANDING GEAR AND PROPELLER:

Install the aileron control horns using the 1.7x15mm screws provided. Then

attach the aileron pushrods to the 2nd hole in the servo output arms and

connect to the control horns.

Slide the wing joining rod into both wings then secure with the screws provided.

Connect the aileron servo leads to the Y lead. Install the main wing onto the cabin top with the 2

off M3x35mm screws provided. The Y lead should be fed into the cockpit area,

Attach the 2 wing strut

assemblies using the screws

provided.

Attach the main landing

gear with the supplied

screws.