J3 Navy Cub Instruction Manual
ASSEMBLY OF THE MAIN LANDING GEAR:
4
Glue the steel wire to
Glue the front landing gear wire to the rear.
the landing gear fairings
Glue the gears parts
together as shown.
Aach the springs to the landing gear and use heatshrink
to cover the springs.
Slide the wheel onto the steel wire and ensu re
the wheel rotates easily on the axle.
Screw the wheel chock through the wheel onto
the ste el axle in a c lockwise direcon.
The landing gear assembly
is now complete.
1
2
3
4
5
6
7