ARF Savage Bobber Instruction Manual

We have supplied a set of carbon fiber wing struts. Identify the longer one for the rear wing strut

and the shorter one for the front. Two additional metal fittings are also required for the installation.

Install the carbon fiber wing strut (rear) to “A” and insert the metal fitting onto the other end. Then

insert it into the pre-drilled hole on the underside of the wing, ensure the metal fitting is fully

inserted. You may have to use a pair of pliers to make some adjustments to achieve a proper fit.

Once you are happy with the setup, you may apply a spot of glue to hold it in place.

Repeat the above steps for the right wing.

COMPLETE