User Manual

7
one more time, turn off backlight. While setting on “warning
temperature setting” ,” emissivity setting” and “Date storage
Reading” this bottom work as DOWN bottom.
(4) MODE Bottom ： Press this bottom to chose mode
E-MAX-AVG-MIN-LAL-HAL circularly。
A、MAX：Measure current max reading ；
B、MIN：Measure current min reading；
C、AVG：Average of all the reading data ；
D、HAL：High Temperature Warning , Chose mode HAL to set
the warning temperature(HIGH), press “UP/DN” to select
temperature. while measure date is higher than setting
temperature, “H” will display on the screen
E、LAL：Low Temperature Warning , Chose mode HAL to set
the warning temperature(LOW), press “UP/DN” to select
temperature. while measure date is lower than setting
temperature, “L” will display on the screen
(5) MEM Bottom：For reading the storage data。Press once to read
the date。Press“UP/DN”to select date。It can store only 12 data,
while over 12 date, the new one will cover the old one。Once
take out battery, all the date will be gone.
(6)
℃
/
0
F：
℃
/
0
F Change，If you want to change the temperature
unit，Please press this bottom。
(7) LED Screen。
(8) Battery door: When replace battery door, please using the
finger indents to pull open the battery door.