User Manual

6
Locate a high temperature spot: Hold the trigger(As shown in
figure 3), then scan across with up and down motions until you
locate the hot spot.(please turn on the laser to for accurate
measuring
1. Diagram description
(1) Trigger：Press once, Power on. Press one more time , Reading
shows on the screen and Turn to Date HOLD model while
release the trigger, auto data hold will keep for 10 seconds. 10
sencond without any operation, will auto power off.
(2) Laser Light&Up bottom：Press once, turn on laser light, press
one more time, turn off laser light. While setting on “warning
temperature setting” ,” emissivity setting” and “Date storage
Reading” this bottom work as UP bottom.
(3) Back Light/Down bottom：Press once, turn on back light , press
(Figure 5)
(Figure 4)