Safety data sheet Article 24486628

Revision number: 7
Date: 04-11-2011
Supersedes SSE1EN ed. 6 dd 25-01-2010
MATERIAL SAFETY
DATA SHEET
INE SUPER
SSE1EN – 200
I.N.E. S.p.A. Via Facca 10 35013 Cittadella (PADOVA) ITALY
Tel. : [phone] Fax: + 39 049/9400249 Internet: www.ine.it E mail: [e-mail] page 2 of 4
5. FIRE-FIGHTING MEASURES
Flammable class: The product is not flammable.
Prevention: Welding hot slag or sparks may cause fire.
Extinguishing media: Powder, foam, carbon dioxide, water.
Protection against fire: Do not enter fire area without proper protective equipment, including
respiratory protection.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Equip clean-up crew with proper protection.
After spillage and/or leakage: On land, sweep or shovel into suitable containers.
7. HANDLING AND STORAGE
Storage: Store in dry protected location to prevent any moisture contact. Keep
packages closed when not in use. High-density solid product; avoid storage
in unstable positions.
Handling: Handle with care; protect your hands and feet.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection Gas and welding fumes generated during the use.
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Do
not breathe gas/fumes/vapour.
Hand protection: Welding gloves.
Skin protection: Skin protection appropriate to the conditions of use should be provided.
Eye protection: Use a protection mask equipped with suitable filter glasses. Interdiction to
wear contact lenses.
Occupational Exposure Limits
Substance CAS
Manganese and inorganic compounds (as Mn) 7439-96-5
Si oxides (as Si fumes) 69012-64-1
Fe oxides (powder and fumes as Fe) 1309-37-1
Titanium oxides 13463-67-7
Particles not otherwise classified (PNOC)
3 mg/m
3
10 mg/m
3
5 mg/m
3
Limit value (TLV) *
0.2 mg/m
3
2 mg/m
3
* Values taken from “Giornale degli Igienisti Industriali”, april 2011