Datasheet

MADE in France
- EN 60974-1
MULTIPEARL AUTO
 

MIG

MMA

TIG
ømm
ømm
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
MIG-MAG
EN 60974-1 (40°C)
MMA
EN 60974-1 (40°C)
TIG
EN 60974-1 (40°C)
U
0
 
IP
50/60 Hz A A A A
GAZ
NO
GAZ
200 300
Electronic
Control
m/min
IA
(60%)
100%
IA
(60%)
100%
IA
(60%)
100%
V cm kg
230 V - 1~ 16 20  200
0.6
-
1.0
0.9
-
1.2
1  15
0.8
1.0
130 A 110 A 110 A 90 A 135 A 115 A 76
41 x 73
x 77
27 IP 21
110 V - 1~ 25 20  150 20  130 20  160 100 A 90 A 90 A 75 A 115 A 100 A 75
MULTI-PROCESS
INVERTER POWER
SOURCE
20  200 A
Ref. 075412
MIG-MAG welding:
- steel wire: Ø 0.6 - 1.0 mm
- stainless steel wire: Ø 0.8 - 1.0 mm
- aluminium wire: Ø 0.8 and 1.0 mm
- ux-cored wire (reverse polarity): Ø 0.9 - 1.2 mm
MMA welding: using basic, rutile, stainless steel or cast iron electrodes (up to Ø 5 mm).
DC TIG Arc-Lift Welding
ACCESSORIES (optional)
MULTI-PROCESS
ROBUST
PFC technology (power factor correction) means it can use power cables
(extension cords) up to 100 m in length.
FV technology (exible voltage) guarantees a consistently stable electric
arc, even in the event of mains-voltage variations (85 - 265 V).
Reinforced wheels combining stability and manoeuverability.
Support for gas cylinders up to 4 m³ (20 L).
Protected against overvoltages up to 400 V (PROTEC 400).
The MULTIPEARL AUTO is a 4-in-1, multi-process, single-phase power source capable of executing MIG/MAG (with or
without gas), DC TIG with arc-lift ignition and MMA welding operations with the highest precision. It boasts 10 separate
welding synergies that facilitate car-bodywork repair and can assemble sheet metal with a thickness between 0.6 - 4
mm. Equipped with a precise four-roller unwinding system, its welding quality is impeccable even when working with
aluminium.
www.gys.fr
INTELLIGENT
SYNERGY mode: After entering four pieces of data:
(material/gas being used, wire diameter, thickness to be welded and the
welding position), the product will automatically determine the optimal
wire-feed speed and welding voltage.
Ten synergies have been developed specically for car body repair
work (steel, CuSi-3 and aluminium).
Two SPOT welding modes: SPOT and DELAY
Straightforward polarity changing for gasless welding using ux-cored wire.
Three MMA welding aids: Hot Start (adjustable), Arc Force (adjustable) and
Anti-Stick.
OPTIMISED SETTING ADJUSTMENTS
BUILT-IN WIRE-FEED REEL
Compatible wire-feed reels: ⌀ 200 and 300 mm.
Motorised, four-roller wire-feed reel for exceptional unwinding.
European torch connection for quick assembly and disassembly.
Type-B roller
Steel / Stainless
steel
Ø 0.6 / 0.8
x2
042353
Ø 0.8 / 1.0 042360
Aluminium Ø 0.8 / 1.0 042377
Flux-cored wire Ø 0.9 / 1.2 042407
Torch kit MB25
(250 A)
041233
Supplied
with:
MIG25 - 3 m
2.5 m - 25 mm²
2 m - 25 mm²
Flux-cored wire
welding kit
Ø 0,9/1,0 & 1,2 mm
072343
MIG/MAG synergy mode
Wire diameter
Wire material
Welding
position
Thickness to be welded
Arc dynamics
Torch monitoring
SR17 DB TIG GRIP
Torch - 4 m
046108