Datasheet

3
Mobile, flexible, efficient!
Clean solutions for tough industrial use.
container wall through the centrifugal force, separat-
ing them upstream from the filter and depositing
them in the FEC’s dust collecting drawer to reduce
filter cleaning. The filter remains efficient for longer
periods, and requires less cleaning.
Cleaning the permanent filter easily and
quickly.
The new filter cleaning concept with an LED display
makes the FEC particularly efficient. Instead of
expensive disposable filters, a permanent filter is
used that can be cleaned quickly and simply with a
rotating cleaning lance operated by compressed air.
The lance only has to be moved up and down a few
times in the housing to remove the weld fume parti-
cles from the filter surface. These then fall down into
the dust collecting drawer and can be disposed of as
domestic waste. To prevent contaminated air from
entering the hall, the exhaust duct of the filter clean-
ing system has a special bypass airflow with an
integrated additional filter.
Integrated start-stop system for quiet
operation.
The FEC extractor can be connected to all standard
air- or water-cooled fume extraction torches. It is
coupled directly to the welding process via a stand-
ard integrated measuring shunt at the earth cable
and an automatic start-stop system. When the user
starts the welding process, extraction starts automati-
cally. This reduces noise emission, saves energy, and
lowers electricity costs.