Manual

18
RENOV CABLE PTI-PRO 400V
EN
DESCRIPTION OF THE G CLAMP
43 5 61
8 9
7
2
1- Arm locking/unlocking lever 6- Mobile arm
2- Cooling pipe 7- Side handle
3- Gyroscope 8- Remote settings button
4- Pneumatic body 9- Spot welding button
5- Over-opening electrode
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
DISMANTLING THE PTI-S7 HARNESS
1 Disconnect the power supply to the PTI-s7.
2
Remove the two screws holding the harness grommet
and all connectors.
PROTOTYPE
3 Remove the right and left arm supports from the PTI-s7.