Manual

20
PTI-PRO RENOV CABLE
EN
4
Remove the two screws holding the harness grommet
and all connectors.
PROTOTYPE
5 Remove the right and left arm supports from the PTI-S7.
RENOV PTI-PRO BUNDLE ASSEMBLY
1
Install the left and right slope arm brackets supplied in
the Renovation Kit.
PROTOTYPE
PROTOTYPE
PROTOTYPE
M6x16 (x4)
10 N·m
M6x16 (x4)
10 N·m
2 Place the clamp on the inclined support.
PROTOTYPE
3 Installing the gyroscope