Datasheet

MADE in FRANCE
- EN 60974-1
AUTOPULSE 220-M1
3 interface options for ease of use :
- EASY (simplied module)
- EXPERT (complete module)
- ADVANCED (specic modules)
MIG/MAG
INVERTER
PULSED
10  220 A
Ref. 070868
New IHM simplied and centralized on car-body builder moving habits
Large colour screen for easy control of the welding cycle set up.
2 control knobs and 4 keys for easy and intuitive navigation of the menus.
Updatable machine and synergies via USB key.
Save up to 500 welding programs for repetitive tasks.
ERGONOMIC INTERFACE
ROBUST AND MOBILE
Reinforced structure.
Frame supporting 1 bottle (10 m3) with low loading height.
The AUTOPULSE 220-M1 is the MIG / MAG pulsed generator with integrated
wire feeder for car body. Equipped with a digital PFC (Power Factor Correction)
it supplies pulsed welding quality comparable to three-phase products.
Designed for the highest performance it features several synergic curves and
exceptional arc quality. Versatile, it can carry out all types of welding: Steel,
Aluminium and Brazing (CuSi3/CuAl8). Its intuitive interface and its high
precision wire feed are ideal for car-body with best welding quality even on thin
sheet.
www.gys.fr
MAXIMUM PRODUCTIVITY
4 microprocessors to give four times the processing power.
Wheel drive system with 2 active drive rolls.
Suitable for wire reels of Ø 200 mm.
Automatic torch detection while pulling the trigger.
Compatible with torch Push-Pull (24V).
SIMPLIFIED WELDING
Many synergic curves guaranteeing an outstanding weld for a large range of
materials, wire sizes and gas.
Its full synergic mode determinates automatically the optimal welding
parameters which can be adjusted (wire speed, voltage, current, self).
OPTIMISED MIG/MAG SETTINGS
Welding processes : standard, pulse, pulse in pulse, cold pulse and manual.
Trigger modes : 2T, 4T, SPOT, DELAY and TACK function.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope,
Downslope, Crater Filler, Postgas, etc.
Compartment for reel Ø 300 mm.
 
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
EN
60974-1 (40°C)
U
0
 
IP
 
Protected
& compatible
power generator
(+/-15 %)
50/60 Hz A min  max
ø mm ø mm
Electronic
Control
m/min
X (40°C) V cm kg
200 >240 V
1~
16 10  220 0.6  1.2
300
50 W
0.5  20 1.0/1.2 (Alu)
150 A @ 60%
130 A @ 100%
80 89 x 93 x 56 58 IP 21 10 kVA
ACCESSORIES (OPTIONS)
Push Pull Torch (24 V)
046283 4 m 3 kg
220 A
(20%)
0.8  1.2
Supplied with a torch :
Alu 250 A
3 m - Ø 1.2
+ Earth clamp
35 mm² - 4 m
PFC
265 V185 V
230 V110 V