Manual

EN
7
Operating manual
KIT RENOVE WIFI
Translation of the original
instructions
7
Connect the cable to the Wi-Fi Upgrade Kit
and insert it into the machine.
Kit Renove Wi et le mettre en place dans la
machine.
8
Thread the cable through its plastic ring to
secure it.
9
Replace the machine’s cover and put the SD
card back into its slot.
-
MACHINE MADE BEFORE OCTOBER 2021
Machines manufactured before October 2021, or with a change control board software version older than
V1.00.07, will require a software update. If this is the case, contact your dealer or distributor for more
information.
Identication plate of a machine manufactured in
September 2021.
Conguration page of a machine with control sof-
tware version V1.00.06
USE WITH GYSPOT SOFTWARE
Machines tted with the Wi-Fi Upgrade Kit work using GYSPOT software, version 4.00 or later.