Datasheet

MADE in FRANCE
- EN 60974-1
AUTOPULSE 320-T1
 
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
EN
60974-1 (40°C)
U
0
 
IP
 
Protected
& compatible
power generator
(+/-15 %)
50/60 Hz A min  max
ø mm ø mm
Electronic
Control
m/min
X (40°C) V cm kg
400 V
3~
16 15  320 0.6  1.2
300
50 W
0.5  20
1.0 - 1.2
(Alu)
260 A @ 60%
240 A @ 100%
82.4 88 x 63 x 93 56 IP 23 16 kVA
MIG/MAG
INVERTER
DOUBLE PULSE
15  320 A
Ref. 069831 - 400 V
New and simplied interface designed specically for use by bodyshop sta.
Colour screen XL to set and control the welding cycle very precisely.
2 scroll wheels and 4 buttons to easily navigate through the dierent menus.
Complete update of the machine and its programs through a simple USB stick.
Storage available for up to 500 welding programs for repetitive jobs.
USER FRIENDLY INTERFACE
ROBUST AND MOBILE
Reinforced casing.
IP23 protection rated.
Frame supporting 1 bottle (10 m
3
max) with low loading height.
The AUTOPULSE 320-T1 is the MIG / MAG pulsed generator with integrated wire feeder for car body.
It is an extremely advanced machine with 68 synergic curves providing an exceptional arc quality.
Versatile, it can carry out all types of welding: Steel, Aluminium and Brazing
(CuSi3/CuAl8). The user friendly interface and the very precise wire feed make the
quality of the weld on very thin sheets outstanding.
www.gys.fr
MAXIMUM PRODUCTIVITY
4 microprocessors increase the calculation speed and general machine eciency.
Very high arc voltage guarantee an easy arcing and an exceptional arc performance on all
types of metals.
Electronically regulated wire feeder tted with 2 drive rolls.
Suitable for wire reels of Ø 200 mm.
Compatible with Push Pull torches (24 V).
SIMPLIFIED WELDING
The 68 synergic curves guarantee an outstanding weld using a large range of
materials, wire sizes and gases.
The integral synergic mode determines automatically the best welding settings but
also allow the user to adjust them (wire feed speed, voltage, current, self).
MIG/MAG OPTIMISED SETTINGS
Welding processes : SStandard / Pulse / Cold Pulse / Double Pulse / Manual
Trigger activation modes : 2T, 4T, SPOT, DELAY and TACK function.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope,
Downslope, Crater Filler, Postgaz, etc.
MIG/MAG welding :
- steel wire Ø 0.6 / 1.0 mm
- stainless steel wire Ø 0.8 / 1.0 mm
- aluminium wire Ø 0.8 / 1.0 / 1.2 mm
Brazing mode :
- wire CuSi and CuAl Ø 0.8 / 1.0 mm
ACCESSORIES (OPTIONS)
Torch Push Pull
046283 4 m 3 kg
220 A
(20%)
0.8  1.2
3 levels of customer interface :
- EASY (simplied module)
- EXPERT (complete module)
- AVANCÉ (specic applications)
Box of contact tips
MB15 / MB25 - 250 A
037458
Supplied with a torch :
Alu 250 A
3 m - Ø 1.2
+ Earth clamp
35 mm² - 4 m