Datasheet

MADE in FRANCE
- EN 60974-1
SMARTFEED M-4
AUTOMATED
SOLUTIONS
Ref. 066618
The SMARTFEED M-4 is a wire feeder for robotic MIG-MAG welding, designed to work eectively with most
robotic arms on the market. It is able to maximise the speed of the arm and its orientation thanks to its small
size and low weight.
www.gys.fr
Four manual controls for maximum
control:
Wire inch forward
Wire inch reverse
Gas purge
Air Blow
Aluminium chassis
Digital communication socket
Collision sensor connector
10-pin socket allowing access to four additional inputs as
well as four additional outputs for even more PLC options
- Motorised drive with four powered rollers for precise wire
feed between 0.6 to 1.2 mm
- DC 48 V motor, max. speed: 25m/min (984 IPM)
- No tools required to change the spools
Suitable Wires
Supplied as
standard
EN60974-5
(40°C)
IP
U
11
U
12
Stainless
Steel
Alu.
CuSi
CuAl
Flux-cored
wires
Electronic
Control
m/min
Type mm/kg
48 V
2 A
24 V
1 A
0.6  1.6 0.8  1.6 0.8  1.2 0.9  2.4
125 W
1  25
1.0
1.2
F
061873
500 A @ 60%
460 A @ 100%
21
244 x 207 x 152
/ 4.5
Euro Connector Socket
Wire-end sensor socket
OPTIONAL EXTRAS
Robotic MIG connection cables - water - 8m - 95mm² 069725
COMPATIBLE POWER SOURCES
- NEOPULSE 320 C (062474)
- NEOPULSE 400 CW (062061)
- NEOPULSE 400 G (014497)
- NEOPULSE 500 G (014503)