Datasheet

08/11/2021
MADE in CHINA
MMA
I²
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-1 (40°C)
MIG MMA
50/60hz
min▷max
GAS
NO
GAS
200 300
Electronic
Control
IA
(60%)
X%
(I2 max)
IA
(60%)
X%
(I2 max)
cm/kg
230V
1~
16A
20▷150A 30▷180A
0.6
-
1.0
0.9
-
1.0
 

0.8
-
0.9
0.8 110A
180A
20%
100A
150A
20%
55x44x25
/ 15,7
EASYMIG 180-4XL
- EN 60974-1
3
in 1
MIG-MAG
GAS
MIG-MAG
NO GAS
MMA
NO GAS
INVERTER
ON
MMA
MIG-MAG
SINGLE PHASE
INVERTER
30  180A
Ref: 066571
• Supplied with a removable torch 150 A
- 3 m tted for steel.
• EURO torch for a fast assembly/
disassembly.
• Reels of ø 200 (5 kg)
• Reels of ø 300 (15 kg)
• 4 rollers motor
• Supplied rollers :
steel wire: 0.8 mm
no gas wire: 0.9 / 1.0 mm
• 15.7 kg weight .
• Ergonomic handle.
• Display of welding
voltage and current
• Reinforced mechanical
structure.
• Rubber feet absorb shock/
vibration.
Manual adjustment of the arc
dynamic. (MIG/MAG)
2 colour LEDs :
• Thermal protection warning LED.
• Power On LED.
• For NO GAS welding.
Integrated wire feeder
MIG/MAG Torch
MIG/MAG - MMA
Easy set up
Simplied display
Polarity reversal cable
• Cored wire
Steel : Ø 0,6/0,8 mm
Stainless steel : Ø 0,8 mm
Alu : Ø 0,8/1,0 mm
• Cored wire no gas Ø 0,9/1,0 mm
• Rutile electrodes Ø 1,6 à 3,2 mm
Light and portable
Digital displays
Sturdy build quality
Welding help in MMA
• Anti-sticking function : avoids
sticking of the electrode at priming.
Inverter technology
• Ensures excellent welding current
quality and low power consumption.
• Earth clamp (cable 2 m / 16 mm²)
• Electrode holder (cable 2 m / 16 mm²)
• MIG/MAG torch (cable 3 m)
• Accessories
- Contact tube 0.9 mm.
- Gas nozzle « gas ».
- Contact tip spanner
Gas hose 1m.
- 2 clamps for the gas hose.
The EASYMIG 180-4XL is a 180A semi-automatic power source combining MIG/MAG welding processes with
or without gas and MMA. Thanks to its intuitive interface integrating digital displays, this welding machine
is easy to use and quickly operational. Lightweight, it is easy to transport on site. EASYMIG 180-4XL is
recommended for welding steel, stainless steel and aluminium up to 3 mm thickness (MIG/MAG).
• For aluminium welding
- Aluminium roller : Ø 0,8 / 1,0 mm (réf.041196)
- Contact tube Ø 0,8 special aluminium (réf. 041059)
www.gys.fr
1
2
3
1
Wire speed selection from 3 to
10 m/min. (MIG/MAG)
Electrode Ø selection (MMA)
Selection of the set voltage from
15 to 23 V. (MIG/MAG)
2
3
• Insensitivity to disturbances
from the outside environment
(draughts,...).
• Portability facilitated by the absence
of a gas cylinder.
NO GAS ready to use
3 welding modes
• MIG/MAG with or without gas and MMA
• Assembled of various materials: steel,
stainless steel, aluminium.
Ultra mobile
• Compact and easy to transport on site.
Benets + of the EASYMIG 180-4 XL
Included accessories
Options (not included)