Datasheet

MADE in China
- EN 60974-1
MULTIWELD FV 220M
 

MMA

MIG
ømm
ømm

Ø mm
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
MIG-MAG
EN 60974-1 (40°C)
MMA
EN 60974-1 (40°C)
U
0
 
IP
 
Chroniony
& kompatybilny
generator mocy
(+/-15 %)
50/60 Hz A A A
GAZ
NO
GAZ
200 300 Ø mm
Sterowanie
elektroniczne
m/min
IA
(60%)
100%
IA
(60%)
100%
V cm kg
230 V 1~ 16 30  200 30  220
0.6
-
1.0
0.9
-
1.2
1.6  5 2  15
0.8
1.0
160 A 120 A 140 A 100 A 75
77 x 79
x 47
32 IP 23 9 kW
110 V 1~ 32 30  120 30  140 1.6  3.2 2  11 110 A 90 A 100 A 80 A 67
WELDING MACHINE
MMA / MIG-MAG
INVERTER
30  220 A
Ref. 065482
MIG/MAG welding :
- steel wire: Ø 0.6 to 1.0 mm
- stainless steel wire: Ø 0.8 to 1.0 mm
- aluminium wire: Ø 0.8 and 1.0 mm
- cored wire (reverse polarity): Ø 0.9 to 1.2 mm
MMA welding: basic and rutile electrodes (up to Ø 5 mm).
ACCESSORIES (options)
MULTIPROCESS
ROBUST
IP 23 classication for outside use.
Accepts very long extension cords (100 m).
Reinforced wheels for better stability and easier transportation.
Support for gas cylinder up to 4 m³ (20L).
Protected against overvoltage up to 400 V (PROTEC 400).
The MULTIWELD FV 220M is a single-phase welding machine, combining MIG/MAG, cored wire and MMA welding
processes. It operates on a supply voltage between 85 and 265 V thanks to its FV (Flexible Voltage) power supply. Its
intuitive interface integrates two digital displays oering simple and accurate settings. Fitted with an accurate and
powerful 4 drive roll feeding system, oering welding quality even on aluminium.
www.gys.fr
INTUITIVE
Display readable even in bright light.
Simple user interface with ergonomic controls allowing gloved
use.
Welding voltage
Choice of the trigger mode: 2T or 4T.
Welding guide: tables assist the user to adjust and ne tune the voltage and the
diameter of the ller wire according to the thickness of material being welded.
OPTIMISED MIG/MAG SETTINGS
INTEGRATED WIRE FEEDER
Compatible with reels : Ø 200 / 300 mm
Wire feeder with 4 rollers for an ecient wire feeding.
EURO torch connector for quick assembly/disassembly.
PRE-HEATING, PURE CO2
Pre-installed socket (36 V - 4.2 A) for gas heater in pure CO2 welding
(heater not included).
Compatible with US (type A) and EURO electrical sockets (type C/E/F).
Arc dynamic
MIG/MAG: Wire feed speed
MMA: Welding intensity
30 l/min
041622
041219
041646
RegulatorDrive rolls type A
Steel / Stainless
steel
Ø 0.6 / 0.8
x1
042339
Ø 0.8 / 1.0 041189
Aluminium Ø 0.8 / 1.0 041196
Cored wire Ø 0.9 / 1.2 042346
Consumables box
MB25 (250 A)
041233
Supplied
with
MIG25 - 3 m
2.5 m - 25 mm²
2 m - 25 mm²
Welding kit for
cored wire
Ø 0.9/1.0 & 1.2 mm
072336
+
042346 (x1)