Datasheet

07/10/2021
MADE in FRANCE
- EN 60974-1
www.gys.fr
MULTIPEARL 210-4 XL
MMA TIG
ømm
ømm
équipé d’origine / original
equipement / Originalausstatung
/ equipamiento de fabrica
EN60974-1
(40°C)
MIG
50/60hz I
2
I
2
min▷max
GAS
NO
GAS
200 300
Electronic
Control
IA
(60%)
X%
(I2 max)
cm/kg
Protected & compatible
POWER GENERATOR
(+/- 15%)
110V 1~ 32A 20-130A 20-160A 20-150A
0.6
-
1.0
0.9
-
1.2
 

0.8
100A
150A
22%
27.5x55x44
/ 20
7,5 kW
9 kVA
230V 1~ 16A 20-200A 20-200A 20-200A 130A
200A
20%
MULTI PROCESSES
SINGLE-PHASE
INVERTER
20▷200A
Ref. 065109
4 in 1, the MULTIPEARL 210-4 XL, is a multi-process power source capable of performing MIG/MAG (with or
without gas), TIG DC and MMA welding with high precision It features 9 welding synergies to enable welding
in all positions. Versatile, but also equipped with a single-phase power supply with PFC/FV technology, it is
the perfect tool in the workshop or on site.
• Automatic calculation of wire speed and
tension according to :
- the type and diameter of the wire;
- the thickness to be welded;
- the gas used;
- the welding position.
• Manual setting possible: wire speed
and arc length.
Suggested synergies :
MIG-MAG SYNERGIES
HIGH-TECH POWER SUPPLY
• MMA
- Welds dierent types of coated electrodes up to ø 5mm
(rutile, basic, stainless steel, steel, cast iron).
- Adjustable Hot Start (0 to 100%): facilitates ignition and can be
adjusted according to the type of metal.
- Arc Force adjustable (0 to 100%): regulates the arc length deviations.
- Antisticking : reduces the risks of the electrode sticking if it comes
into contact with the workpiece
• TIG
- TIG DC welding and TIG Lift ignition
with the TIG EURO torch.
- Adjustable Post Gas and Downslope (arc downslope).
• MIG-MAG
- 4 roller motor: ø 200 and ø 300 mm reels.
- Adjustable manually or synergistically.
- SPOT and DELAY functions available.
- Can weld sheets from 0.6 to 6 mm thick.
Type of
metal
Fe Fe AlMg5
Stainless
steel
Cored
wire
CuSi 3 CuAl 8 AlSi 5 AlSi 12
Process
MAG MAG MIG MAG MAG MIG MIG MIG MIG
Gas
Ar+CO² CO² Ar Ar+CO² 2% Ar Ar Ar Ar
Ø possible
0.6 - 0.8
- 1.0
0.6 - 0.8
- 1.0
0.8 - 1.0 0.8 - 1.0
0.6 - 0.9
- 1.2
0.8 0.8 1.0 1.0
Welding
positions
all all all all all all all all all
FV
FLEXIBLE VOLTAGE
POWER FACTOR CORRECTION 30% energy saved
PROTEC 400
265 V
PFC
30%
ENER G Y
S A V I N G
Without PFC
P400
PFC technology supresses peaks
and regulates the supply current.
Also allows the use of extension
cords or generators and contri-
butes to a better current stability
during the welding phase.
The device works on
a simple 230V-16A or
110V-32A plug, even in
intensive use and on site
extensions (100m).
Can withstand occasional or
permanent voltage variations on
the electricical network up to 400V
(lightning, generator, load
shedding loads...)
Économique
sécuriséflexible
FV
85 V
P400
Économique
sécuriséflexible
FV
PFC
P400
ECONOMICAL
SAFEflexible
Supplied with :
- earth cable (2.50 m)
- steel torch MIG 250A (3 m)
- Electrode holder (2 m)
Accessories (en option)
TIG Torch
SR17 DB - Air
4 m (046108)
TROLLEY 4m³
WELD 810
(037489)
TROLLEY 4m³
WELD 610
(040281)
3 WELDING PROCESSES