Manual

KIT RENOVATED GC/G CLAMP

Gently remove the cover.

• Unscrew the screw coming from the push button of

side selection (1 M4x6 screw ref.41022).

• Disconnect the button connector

side selection button.

• Remove the shunt protection by pulling it towards

the back of the clamp.

• Disconnect the handle connector.

• Unscrew the screws of the power cable (2 screws

M8x30 CHC 42062 and 2 Schnorr washers M8 41266).

• Unscrew the 4 CHC M6x35 screws (42061) and 4

Schnorr M6 washers (41265) of the arm support.

Attention: You must keep the screws and

washers for the new support.