Manual

KIT RENOVATED GC/G CLAMP
EN
13
Tighten the 2 screws of the power cable (2 M8x30
CHC 42062 screws and 2 Schnorr M8 41266 washers).
> Clamping force: 35Nm.
Reconnect the handle connector.
• Reconnect the push button connector
side selection.
Tighten the screw of the side selection push button (1
M4x6 screw ref.41022).
> Tightening torque 2.5 Nm.
Tighten the 2 M4x6 screws (41022) of the shunt pro-
tection.
> Tightening torque 2.5 Nm.
• Screw the spacer back on.
> Tightening torque 2.5 Nm.
Screw the cover back on (6 M4x6 TCB screws) as well
as the
sheath support (5 screws D4x12 TCBL TORX20).
> Tightening torque 2.5Nm.