Manual

KIT RENOVATED GC/G CLAMP

• Reconnect the water pipes.

• Tighten the screw (M5x10 41025) and Schnorr washer

of the shunt (41266) and the plastic part 90501.

> Clamping force: 26Nm

• Put the shunt protection back in place, tting it in until

it stops.

• Replace the handle, sliding it into place.

• The screw output length must be between 13 and

16mm

• Screw the arm support with the screws (M6x35 42061)

and washers (M6 41265) from the old support

> Clamping force: 20Nm.