Datasheet

MADE in FRANCE
EN 693 : 2001 + A2 : 2011
EN 792-13 : 2000 + A1 : 2008
EN ISO 11148-1 : 2011
GYSPRESS 10T PUSH-PULL
Push Pull
240
141
131
81
44
79
RIVETING
MACHINE
Ref. 063853
The GYSPRESS 10T PUSH-PULL rivet gun is a pneumatic-hydraulic setting tool specically designed
for rivets used in automotive repair, such as self-piercing rivets, ow-form rivets, or solid rivets. The
Push-Pull system allows an easy extraction of punching dies from thick stacks of Aluminium or Steel
sheets, therefore saving precious time.
ACCURATE SETTINGS
The pressure, as well as the die speed, can
be precisely adjusted in order to place rivets
without any sheet distortion.
ERGONOMIC AND EFFICIENT
Maximum pressure of 10 tons with
integrated pressure gauge.
Fast and easy arm change.
C-arm swivels 360° around the riveting
machine axle.
Selection of arms available for difcult
access situations.
Easy to use ergonomic handle and trigger.
Magnetic die makes rivet positioning easy.
Speed control
Pressure control
0 > 6.5 bar
Push-Pull
selection
Steel arm
Closed
hydraulic
system
Command
trigger
Pressure
gauge
Pressure
adjustment
Delivered with :
- 2 die keys
- 1 strap
- 1 arm HR110
- 1 handle for arm
- 1 box of rivets
HR110
063310
HR210
063327
HR310
063334
1 standard die kit for rivet positioning
and extraction + centering punch
Sets of dies for
- self-piercing rivets (Ø 3.3 and 5.3 mm)
- ow-form rivets Ø 6 mm
ACCESSORIES
  
HR110 HR210 HR310
Cycle time
AIR input
(Bar)
44
79
131
81
240
141
39.5 x 180 cm 58 x 48 x 15 cm 11.8 kg 4 kg 3 kg 5.4 kg 12 kg 4 sec
normal 6.5
maxi 10
Select Push Pull :
Push Pull system :
This innovation facilitates the extraction of the punching
dies thanks to the use of a stripper and pulling action.