Datasheet

Made in France
- EN 60974-1
PLASMA
CUTTER
20  105 A
Ref. 063044
Ref. 063112
Duty cycle 100% A at 105 A (40°C).
Marking mode, ideal for tracing and identifying parts.
Cuts all material types (mild, stainless, tempered, HLE), aluminium, copper, etc.
Optimized cooling design to operate in an industrial environment.
Connectable via an optional CNC kit for use on an automated cutting table.
Reinforced structure IP 23.
HIGH-PERFORMANCE TORCH
Premium torch available in 2 lengths and 2 shapes (manual and straight for automation)
Large choice of consumables adapted to all thicknesses.
Designed to be shock and heat resistant.
Quick connection/disconnection of the torch, no tools required for transport or maintenance.
Easy to use trigger mechanism for added comfort.
SIMPLE TO USE
User friendly interface with OLED display (7 languages).
6 modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger,
Cutting of perforated sheets, Marking.
Meter for checking the wear of the consumables (tip and electrode).
Pneumatic diagnosis (moisture presence test and compressor control).
HF-free ignition to prevent disturbances that could damage nearby electronic equipment.
Simplied software update via USB cable without any tools or disassembly.
The NEOCUT 105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick
in industrial environments. It is equipped with automatic air pressure management, in all modes, oering
optimum cutting quality throughout the lifespan of the consumables. Can also be connected to a cutting table,
its «Marking» mode is perfect for tracing and identifying parts.
www.gys.fr
Supplied with :
4 m
16 mm
²
MT 125
6 m
ref. 063044 -
ref. 063112
ACCESSORIES & CONSUMABLES (options)
Multilingue intuitive interface
NEOCUT 105
  

mm (max)
Gouging
AIR SYSTEM
EN
60974-1 (40°C)
 
IP
 
Protected
& compatible
power generator
(+/-15 %)
Withdrawal
rate
50/60 Hz A A Fe Al/CrNi Fe Al/CrNi Fe Al/CrNi
Pressure
(bar)
L/min X (40°C) cm kg
400 V
3~
32 20  105 20 18 35 30 50 40 8 kg/h 5  9 305 105 A @ 100%
69 x 40
x 61
33 IP 23 30 kW
MAXIMUM PRODUCTIVITY
Piercing Clean cut Separation
Automatic management of pressure and air ow rate whatever the torch length
and the operating mode (cutting, gouging and marking)
Optimised consumable lifespan
SYNERGISTIC AIR PRESSURE
For use on cutting table:
Sack truck
039568
Filter kit
046580
+
CNC-1
Analogic kit
CNC-2
Digital Kit
CNC-3
Retrot Kit
AT-125 automatic
torch
039988 064737 068957
6 m
038479
12 m
039520
15 m
069787
20 m
069794
Consumables box
45 - 65 - 85 A 85 - 105 A
039537 064720