Datasheet

12/08/2019
MADE in PRC
www.gys.fr
Ref. 061620
Puissance
max
Irradiance
at 12 cm
IP
50/60 Hz
(recharge)
NOVA-UV S
100 - 240 V 12 W
3,7 V /
5400 mAh Li-Ion
1,5 h 3,5 h
Minimum 6mW/cm2
Center 15mW/cm2
IP30 -10°C < 40°C IK07 163 x 63 x 163 mm 705 g
■ High performance fast drying: only 1 minute.
■ Can dry an area of 20 cm in diameter.
■ High efficiency: high power lamp (12 W) for low energy consumption (range 1.5 h).
The NOVA-UV S drying lamp uses the cold curing method which:
■ does not generate any heat,
■ has no impact on heat-sensitive materials located near the area to be dried (plastics,
paints, sheet metal...)
■ after use enables you to immediately start sanding, polishing, etc.
FLEXIBLE USE
A DRYING LAMP WITH MULTIPLE QUALITIES
A HIGH-PERFORMANCE PROJECTOR
COLD CURING TECHNOLOGY
12 cm
Minimum distance
LED UV λ 395-400 nm
Irradiance 6-15 mW/cm
2
The SCANGRIP NOVA-UV S drying lamp is an ultraviolet LED work light specicaly for UV treatment of
automotive coatings. Its power and autonomy enables it to dry large surfaces of specic primers and paints
in record time. This lamp, with its ease of use, guarantees an signicant time saving compared to traditional
drying methods.
1’ min
■ Designed for the workshop environment
- shock and vibration resistant: IK07 certied.
- Long life span: more than 30,000 hours of use.
■ Simplied light interface
- with an integrated timer from 1 to 5 minutes and
battery indicators.
■ Supplied with a 5 V 2 A USB charger (1m cable).
Drying zone
Ø 20 cm
■ Flexible support that can be tilted, with
powerful magnets to achieve the desired
UV curing angle.
■ Lightweight and handy portable device.
SCANGRIP NOVA-UV S DRYING
LAMP
LIGHTING