Datasheet

13/07/2021
MADE in ITALY
- EN 60974-1
www.gys.fr
EVO 2.1 Fume extractor RE (230V)
+ Arm 160/3
SINGLE PHASE
FUME
EXTRACTOR
Ref. 061552
Applications
Filtrations
Arm 160/3
The EVO 2.1 is designed for the following applications :
• MMA Welding
• TIG Welding
• MIG/MAG Welding
Three ltration steps :
1 - Metal lter (ltration level : 1)
2 - Undulated/absolute HEPA lter (ltration level : 2)
Includes
Filter 1.2
Ref. 046498
On/O
Fan :
automatic or manual
mode
Supplied with :
- 230V plug for trolley power supply
- 3m Power supply cable
- 230V connection plug for the welding station on the trolley
- Cable drum for EVO 2.1
The fume extractor EVO 2.1 and its arm 160/3 have been designed to extract
and purify dry fumes generated by various welding processes. The fume extractor has a
removable arm pivoting at 360°.
Robust : Made of reinforced steel anodised aluminium 6061 alloy to ensure durability
over time (despite continuous exposure to fumes).
Light : Lightweight rigid aluminium pipe.
Ecient : The square design of the extractor hood gives maximum extraction.
Ajustable : The extraction ow is adjustable and the hood has a handle for manoeuvrability.
The arm pivots 360 °.
Secure : Anti-intrusion grill (cloth/paper).
Workstation for
230V welding
machine
(180 kg max)
Control panel
Outdoor fumes
rejection
Power Current Flow Low
Sound
emission Arm
IP
50/60hz
W A
m
3
/h Pa dB(A) m kg
230V 1~ 16A 1 100 4,85 1 500 1 400 73 3 100 55
External rejection
• Gases and fumes generated during welding
are rejected outdoors to prevent their spread
into the workplace.
• Provide a 150 mm diameter sheath to
evacuate the smoke outside.
Ø 150 mm