Datasheet

23/06/2021
MADE in ITALY
- EN 60974-1
Puissance Courant Débit Dépression
Émission
sonore Bras
IP
50/60hz
W A
m
3
/h Pa dB(A) m
kg
400V 3~ 32A 1 100 4,85 1 500 1400 73 3 100 55
Ref. 061545
Ø 150 mm
Outdoor fumes
rejection
UNI 2.0 Fume extractor (400V)
+ arm 160/3
Three Phase
Fume
Extractor
The fume extractor UNI 2.0 and its arm 160/3 have been designed to extract and purify dry
fumes generated by various welding processes. The fume extractor has a removable arm
pivoting at 360°.
Applications
The UNI 2.0 is designed for the following applications :
• MMA Welding
• TIG Welding
• MIG/MAG Welding
Robust : Made of reinforced steel and anodised aluminium 6061 alloy to ensure
durability over time (despite continuous exposure to fumes).
Light : Lightweight rigid aluminium pipe.
Ecient : The square design of the extractor hood gives maximum extraction.
Adjustable: The extraction ow is adjustable and the hood has a handle for
manoeuvrability. The arm pivots 360 °.
Secure : Anti-intrusion grill (cloth/paper).
Arm 160/3
Includes
Filter 1.2.3
Ref. 046467
Filtrations
Three ltration steps :
1 - Metal lter (ltration level : 1)
2 - Undulated lter (ltration level : 2)
3 - EPA rigid lter (ltration level : 3)
4 - Coal lter (option : ref. 064522)
Control panel
On/O
Cooling fan on
Obstructed lter alert
Supplied with :
- 6m cable
- Plug not included
External rejection
• Gases and fumes generated during welding
are rejected outdoors to prevent their spread
into the workplace.
• Provide a 150 mm diameter sheath to
evacuate the smoke outside.