Datasheet
MADE in Taïwan
www.gys.fr
05/08/201905/08/2019
MADE in Taïwan
www.gys.fr
Ref. 059139
Bumper drilling kit for parking sensors
DRILL BOX
The bumper drilling kit for sensors is easy to use. It allows vehicle replacement bumpers to be
perforated cleanly and precisely with the minimum number of tools. This set of punches oers
many diameters allowing the drilling of bumpers of many brands.
1 drill HSS 5/16’’ HSS
centering screw and lock nut
5 push discs
5 upper cutting discs each with two diameters
5 lower cutting discs each with two diameters
The complete kit includes 10 diameters:
Ø 17 - 18 - 18,2 - 19 - 20 - 22,5 - 24 - 26 - 26,7 - 32 mm.
The Detector Bumper Drilling Kit is capable of drilling precise
holes in plastic bumpers up to 5 mm thick, without damaging
the vehicle’s paint.
- The installation of the sensors is carried out in 3 steps:
- Quickly cut holes to the right size.
- Glue the sensor supports.
- Insert the sensors into their brackets.
ACCURACY AND SPEED
BOX COMPOSITION
1 upper cutting disc with two diameters:
26 mm at the bottom and 32 mm at the top