Datasheet

The Power Hub Module (PHM) is an accessory that allows identical connected GYSFLASH PRO
(maximum 4) to be wired in parallel in order to charge large capacity batteries. It must be connected
to the Smart Hub Module (SHM - 025981) which manages the communication part of the Gysash.

kg

mm
Imax

entrée sortie
2.7 317 x 245 x 90 400 A 10  25 mm² 25  70 mm²
POWER HUB MODULE
Ref. 056589
CONNECTED
ACCESSORY
MADE in FRANCE
www.gys.fr
MULTIPLY THE POWER OF THE GYSFLASH
A FULLY CONFIGURABLE SYSTEM

SHM
PHM
The PHM adds the power of 4 Gysash to make it an ultra
powerful charger. It consists of:
• 4 inputs (+) and (-) accommodating identical connected Gysash
cables
(section from 10 to 25 mm² depending on the Gysash
model) .
• A (+) and (-) output for cables with a larger cross-section, from
25 to 70 mm², to accept a very high current
(400 A max) .
• 2 inner copper bars, 3 mm thick, oering excellent electrical
conductivity and good corrosion resistance.
• The PHM allows its installation to be congured at will, according to the needs of the battery to be
charged. It is possible :
- to adapt the length of the input cables
(between 1 and 5 m) .
- to choose a cable with an appropriate cross-section (between 25 and 70 mm²) and length at the output
of the PHM.
• The PHM can be xed horizontally or vertically.
Example: 4 Gysash 101.12 CNT (100 A / 12 V)
connected in parallel using the PHM box provide a
current output of 400 A.
Supplied with:
Lugs from 10 to 70 mm²
required to customise your
installation.
100 A 100 A 100 A 100 A
400 A
Use of
SHM + PHM