Datasheet
30/05/2022
Made in France
www.gys.fr
liquid
cooling
liquid
cooling
FEATURES
• High heating performance:
5,200 W of power, that can be adjusted in increments of 500 W,
allows the user to directly heat up the heart of the metal to a depth
of 6mm. This machine is able to bring steel up to a red-hot heat
(around 1,000°C):
37LG 39LG 50LG
M10 1 s M12 1 s M14 1 s
2 mm 5 s 2 mm 5 s
4 mm 5 s
2 mm 3 s
Ø 10 15 s Ø 10 15 s Ø 10 10 s
• Enhanced security and time savings:
Immediate and ame-less heating applied to a specic area, allowing
the user to work close to cables, pipes or any other heat-sensitive
part without requiring dismantling.
• Comfortable to use: its three-metre long inductor cable enables
working at heights.
The ideal tool for mechanical and maintenance work:
• essential for releasing steering linkages (wheel alignment)
• remove glow plugs, seized up wipers and spare-wheel carriers
• release seized up bolts and steering ball joints without damaging them
• release shaft drives that have seized up in the hub
• remove automotive or HGV exhaust lines
The POWERDUCTION 50LG provides instant and powerful heating to release or heat both steel and
aluminium. Equipped with a liquid cooling unit, this product is capable of heating metal parts for minutes at
a time without interruption.
POWERDUCTION 50LG
P.N. 055599
LIQUID-COOLED
INDUCTION
MACHINE
Inductors and accessories:
Freq.
Container capacity
cooling liquid
50 Hz A W kHz cm kg m m
37LG 39LG 50LG
230 V 1~ ≥25 5200 30-50 1,5 l 7 l 85x58x50 65 8 3
as well as car body work:
• remove glued on steel or aluminium parts
• straighten out bent chassis (if not HSS)
Side heating
(if not HSS)
Release rusted bolts Release steering linkages
P.N. 056862 P.N. 053823 P.N. 056909
P.N. 056879 P.N. 053823 P.N. 056909
P.N. 056886 P.N. 053458 P.N. 056916
• Reinforced safeguards for use with power sources and protected
against permanent overvoltage up to 400 V (factory tested).
• PFC feature: Power Factor Correction: regulates and uses the
power supply more eciently.
90°
PFC
• Supplied with a complete inductor 20°
(P.N. 056862).
• This product requires the cooling
liquid to be replaced regularly (P.N.
052246).
20°