Datasheet
30/05/2022
Made in France
- EN 60974-1
I2 max
U2
IRMS
50/60
Hz
W
V
W
W
cm kg
230V
1 ~
2600 Manual 5.4 16 1800 OK 20x32x18 14
GYSPOT 2700
STEEL DENT-
PULLING
EQUIPMENT
P.N. 055353
The GYSPOT 2700, with its maximum output of 2,600 A, is the ideal product for dent pulling and
straightening out low-thickness car-body components (bonnet, door and roof panel etc.) This is a
multi-functional product, making it suitable for many applications. With its low power consumption,
it’s designed to operate eectively on a simple, 230 V power supply.
Four available modes:
• Star-washer welding for panel beating
• Wavy-wire welding, ideal for curved proles (e.g.
wheel arches)
• Shrinkage, for slight impacts and nishing work
• Suitable for use with a graphite pencil
Equipped with a switch to go into graphite pencil
mode.
• Intuitive, the turn wheel enables the user to select
both the output power and the requested mode.
• Use manual mode to control the welding process by
gently pulling the machine’s trigger.
A MULTI-FUNCTIONAL DENT PULLER
EASY TO USE
Cable length
Power supply: 2 m
Earth: 1.7 m
Gun: 1.8 m
DELIVERED AS STANDARD WITH:
• spot slide hammer (1.1 kg / x1)
and a star-washer support tip (x1)
• star washers (x3)
• contact shrinking tip (x1)
• earthing pad (x1)
OPTION:
Trolley
Spot 600
P.N. 053533
Trolley
Spot 800
P.N. 051331
Spotter Box 2700
P.N. 053922
www.gys.fr
I2 max
U2
IRMS
50/60hz
A
V
A
A
cm kg
230V 1~ 2600 Manual 5,4 16 1800 OK 20x32x18 14