Datasheet
04/10/2019
MADE in Taïwan
www.gys.fr
Ø 0,8 x 50 Ø 0,6 x 50
Ø 0,6 x 50 Ø 0,8 x 50
Ø 0,8 x 50
x 20 x 20 x 20 x 20 x 20
Ref. 052925
The Hot stapler for bumper repair is a repair system for all types of plastics using heated
metallic staples. It allows quick repair of bumpers, spoilers, dashboards, headlights …
A staple, positioned on a stapler holder, heats up under
the eect of a current which ows though it.
The heated staple penetrates easily inside the plastic to
be repaired. It then becomes a resistant structure on
the « welded » area.
Staples of dierent shapes and diameters allow repair in
all congurations : at areas, corners, thicker plastics.
• Quick and ecient repair method.
• Repair instead of replacing.
• Quickly repairs cracks on bumpers.
• Reinforces the repair of plastic tabs.
• Delivered with 100 staples.
• An electronic unit with a staple holder. 3 levels of heating
for the staples. ON/OFF switch integrated on the staple
holder to start the heating of the staples.
• Mains cable length : 1,60m
• Staple holder cable length : 1,5m.
• Operating voltage : 230V.
• Delivered with 5 sets of 20 staples of each type
(see below)
Box of 250 staples
Ref. 052413
WORKING PRINCIPLE
ADVANTAGES
CONTENTS OF THE BOX
CONSUMABLES
Hot stapler for bumper repair
Car body
accessories