Datasheet

ManualsBrandsGys ManualsCAR BODY ACCESSORIESPOLYCARBONATE RENOV (INCLUDING POLISHING)

RENOV POLYCARBONATE

Ref

052086

Steps 1 - 4: Sand all or part of discoloured surface using abrasive discs with increasingly finer grades. (P500, P800,

P1500 and P3000) to create a smooth and even matt finish.

Step 5: Polish using two foam pads (provided) and special polycarbonate / Plexiglas polish.

P500

Smoothens defects

from the

polycarbonate

P800

Removes any

remaining defects and

leaves a matt surface.

P1500

Eliminates any residual

scratches from the

polycarbonate that remain

after using P500 & P800

P3000

Sand with water before

polishing

Black and

range Foam Pads

To apply the polish to the

headlight

The Renov Polycarbonate toolkit can restore

discoloured polycarbonate headlights.

This process can be used on

Plexiglas on any vehicle, including planes and boats.

This avoids the need to replace the

Headlight unit

QUICK AND EASY STEPS FOR A HEADLIGHT AS GOOD AS NEW

CAR BODY EQUIPMENT

052017

50 abrasive

pads

P500 diam

eter

76 mm

052024 x 50 abrasive pads P800 diameter 76 mm

052031 x 50 abrasive pads P1500 diameter 76 mm

052048 x 50 abrasive pads P3000 diameter 76 mm

052079 x 1 polycarbonate polish 250ml bottle

052055 x 1 black foam pad diameter 76 mm

052062 x 1 orange foam pad diameter 76 mm

Consumables

Renov Polycarbonate (Ref. 052086) comes complete with

- a high performance orbit sander (15000 rpm –composite material - 500gr)

- and a powerful polisher (225W – composite material - 600gr)

- the consumables listed below (10 units of each abrasive reference)

270706

200307

210307

Email :

contact

@gys.fr

www.gys

welding

.com

092010

Summary of content (1 pages)

PAGE 1
C AR BODY EQUIP ME NT Ref: 052086 RENOV POLYCARBONATE The Renov Polycarbonate toolkit can restore discoloured polycarbonate headlights. This process can be used on Plexiglas on any vehicle, including planes and boats. This avoids the need to replace the Headlight unit 5 QUICK AND EASY STEPS FOR A HEADLIGHT AS GOOD AS NEW Steps 1 - 4: Sand all or part of discoloured surface using abrasive discs with increasingly finer grades. (P500, P800, P1500 and P3000) to create a smooth and even matt finish.