Datasheet

IP
50/60hz W
cm kg
230 V ~1 16 A 2400 21 21.5x35.5x27 7.2
16/11/2021
MADE in FRANCE
GYSDUCTION AUTO
INDUCTION
HEATING
SYSTEM
Ref. 048775 - PROLINER GYSDUCTION AUTO
Ref. 053380 - GYSDUCTION AUTO COMPLETE
Ref. 056978 - GYSDUCTION AUTO COMPLETE +
Ref. 048812 - GYSDUCTION AUTO MECA
www.gys.fr
The device only starts if the metal is
ferrous (not suitable for Aluminium
or Copper). The device will then
automatically adjust the heating to avoid
damaging the part due to overheating.
AUTO MODE
Features
Power: 2400 W
Safety: Instant heating without ame.
Ecient: Only heats metal parts with accuracy whilst
protecting the adjacent parts (no need to remove engine parts).
Clean: Remove parts without using solvent.
Flexible Voltage: Power supply from 165 V to 265 V.
The GYSDUCTION AUTO is a powerful instantaneous induction heater. Ideal for car body repair,
mechanics and maintenance to:
- Remove all adhesives, logos, side moldings.
- Remove direct glazed windows without damaging the trim (rear window, rear quarter light, panoramic roof…).
- Remove stone guard protection and sealers.
- Release mechanical parts (bolts, screws, spark plug, injector…).
- Repair small dents on the car body without retouching the paint.
8 PACKS
GYSDUCTION
AUTO
Plastic
Wedge
051294
Glass
Inductor
053373
Body Inductor
053359
Bolt Inductor
053366
Dent pulling
inductor
054776
Spiral inductor
054783
Remote
control
055490
Trolley
SPOT 800
051331
Cable support
052284
PROLINER GYSDUCTION AUTO ref 048775
- -
GYSDUCTION AUTO COMPLETE ref 053380
- - - -
GYSDUCTION AUTO COMPLETE + ref 056978
- - -
GYSDUCTION AUTO MECA ref 048812
- - - - - - -
GYSDUCTION AUTO MECA + ref 056961
- - - - - -
GYSDUCTION AUTO GLASS ref 048805
- - - - - - -
GYSDUCTION AUTO BODY SHOP ref 048799
- - - -
GYSDUCTION AUTO DENT REPAIR ref 054981
- - - - - - - -
Ref. 056961 - GYSDUCTION AUTO MECA +
Ref. 048805 - GYSDUCTION AUTO GLASS
Ref. 048799 - GYSDUCTION AUTO BODY SHOP
Ref. 054981 - GYSDUCTION AUTO DENT REPAIR
BODY INDUCTOR (ref. 053359)
To quickly and easily remove all adhesives and strips as well as side
moldings in a few minutes without any damage.
GLASS INDUCTOR with knob
(ref. 053373)
To peel o welded metal sheets and burn o stone guard protection
with the heated scraper. It is also suitable to remove glass (rear window,
rear quarter light, panoramic roof...).
BOLT INDUCTOR
(ref. 053366)
To warm and release all types of mechanical parts in few seconds such
as bolts, screws, shock absorbers, track rod ends, etc…
PLASTIC WEDGE
(ref. 051294)
As a supplement to the inductors, the scrapers are essential to remove
logos/badges and stone chip protection etc...
Consumables (optional):
- 10 Logo tapes (051492)
- 10 protections for bolt inductor + glue (053847)
- 5 protections for glass inductor + glue (053854)
DENT PULLING INDUCTOR (ref. 054776)
For the repair of light car body dents caused by hail, eliminating the need
to retouch paint work.
SPIRAL (COILED / BRAIDED WIRE) INDUCTOR
( ref. 054783)
To warm and release all types of mechanical parts in few seconds such
as bolts, screws, shock absorbers, track rod ends, etc…